If wipers struggle in heavy rain, first identify what changes. A moving blade that smears water, a blade that misses a fixed area, and an arm that slows or stops point to different checks. Use clean, wet glass while parked and leave road-speed observations to a qualified technician if needed.
Write down which of these three things happened
If both blades move normally but leave a uniform smear, check the glass and wiping edges for contamination. If a fixed patch remains in the swept area, inspect for visible damage and verify the blade’s correct position. If the arm hesitates, stops, or moves at an unexpected speed, record the switch position and whether one or both arms were affected.
Start with what you can see
Clean the glass and examine the blade edges using the maintenance steps in your vehicle manual. GM’s wipe-quality guidance includes contamination and damage among causes of poor wiping. Test on wet glass while parked if the arms can move freely. Keep hands clear of the mechanism.
Check recent replacement work
Review the exact year, model, blade position and connector for the replacement set. Check which blade goes where and confirm the installation with the applicable instructions. Stop testing if the arms or blades touch one another or the trim.
When the issue needs further assessment
If low speed is unavailable, one arm stops, or a blade repeatedly fails to clear the expected area, tell the workshop what happened at each setting. If visibility is inadequate on the road, reduce speed appropriately and find a safe place to stop.
Related Wowiper guides
- Check front wiper clearance before the first sweep
- Checks when wipers hit each other
- Record what happens when one front arm moves
- What to note when only high speed works
- Check a Ford Expedition wiper set
- Check a Chevy Traverse three-blade set