If one front arm stays still while the other moves, stop the test. Park safely, switch the wipers off and look for an obvious obstruction. Arrange an inspection if the arm remains out of sync.
Read the transcript
Park safely and switch the wipers off. Look for a visible obstruction only after following your vehicle’s instructions. Recall whether the whole arm stayed still or the blade moved incorrectly at the joint. Record the affected side, recent ice or service, and any changed rest position. Arrange an inspection if the issue remains.
Stop the wipers and park safely
If visibility becomes inadequate while driving, move to a safe place and switch the wipers off. A stationary arm can leave a large unwiped area. With the car parked and the system off, inspect the lower glass for visible snow, ice or debris. Consult your vehicle manual before touching the arms or clearing an obstruction. Honda’s Civic manual describes switching the system off and placing the vehicle in the specified power state before clearing an obstacle.
Distinguish blade movement from arm movement
Record what you already saw. Did the whole arm stay still, or did the arm move while the blade twisted or separated at its attachment? An arm that stays still points to a different inspection than a loose blade. Look from outside with the power off for a detached blade or a visibly trapped arm. Avoid pulling the arm across the glass to see whether it is free.
Give the technician the details
Write down the affected side, whether the problem started after ice or recent service, and whether the rest position changed. Share any noises you heard and any warnings shown on the dash. Continuing to cycle the wipers can cause contact if one arm is out of position. If the cause is unclear or the issue returns, get the system inspected before relying on it in rain.