Wowiper's listed set for selected 2018–2023 Chevrolet Traverse models contains a 24-inch driver-side blade, a 20-inch passenger-side blade, and a 10-inch rear blade. Treat that as a three-position checklist: two different front lengths and one separate rear attachment to verify.
The listed blade positions
| Position | Listed size | Quantity |
|---|---|---|
| Driver-side front | 24 in | 1 |
| Passenger-side front | 20 in | 1 |
| Rear window | 10 in | 1 |
The Wowiper Traverse product page specifies the years 2018 through 2023. This guide describes that product application. It does not extend the listing to an earlier Traverse, a 2024 model, or a different vehicle because the package looks similar.
What a three-pack includes
In this listing, “three-pack” means one replacement for each of the positions above. It does not mean three interchangeable front blades. When comparing another seller's front pair with this set, first account for whether the rear blade is included.
Keep the 24-inch and 20-inch blades separated until you know which arm each belongs on. Photographing the original arrangement before removal gives you a reference for position and orientation; it does not independently prove that a previously fitted blade was correct.
How to check fit before removing the originals
- Confirm the vehicle is a Traverse in the stated model-year range.
- Compare the original arm ends with the replacement connectors and instructions.
- Inspect the rear attachment separately. A front installation video may not describe it.
- Check whether you are purchasing a complete blade or a rubber refill; this listing describes complete blades.
When the rear blade is the only problem
If the front blades clear properly and only the rear edge is damaged, compare the available rear replacement with the existing attachment. A full set is a purchasing option, not a diagnosis that every blade must be replaced together. The rear wiper fit guide covers the checks for a separate rear purchase.
Use the Wowiper installation reference alongside your vehicle manual. After fitting, confirm retention as the blade instructions require and test on clear, wet glass before relying on the system in rain.