How to Check Front Wiper Clearance Before the First Sweep

With the vehicle parked and the system off, confirm both blade positions and look for contact near the cowl and trim. Follow the manual’s parking and testing procedure and keep clear of the moving arms.

Listen to the checklist. Narration is synthetic.
Read the transcript

Confirm both front blades are in their assigned positions. Return the arms using your vehicle instructions. With the system off, look at the tips near the cowl, trim and neighboring blade, and clear loose objects. Make a brief wet test from the driver’s seat. Switch off and recheck the fit if anything touches.

Start with the vehicle in its normal parked position

Check that the new driver and passenger blades are in the positions called for by the kit. If the vehicle has a maintenance position, follow the manual for lowering the arms and returning the system to its normal position. Some vehicles need a particular power state or switch action. Avoid dragging the arms by hand to approximate the normal sweep.

Look at the closest edges

With the wipers off, look at the resting blades from outside. Inspect the blade tips near the lower cowl, windshield edges and neighboring blade. Remove loose tools, packaging and anything left within the path. If a blade tip already touches trim or the other blade while parked, recheck the position, length and connector before powering the system.

Make the first short wet check from the seat

A resting view confirms visible clearance at rest. The next check is a brief wet sweep using the vehicle procedure. From the driver’s seat, watch for contact at the outer edge or between the blades. Turn the system off if a blade hits or shifts. Check whether the model and kit place the two lengths on the correct sides, then ask for help if the fit remains uncertain.

Sources and next steps

Comment form title