Switch the wipers off if the blades touch each other, the windshield surround, or another part of the vehicle. Check the application, blade lengths, assigned positions, and connector seating before another test. Repeated collisions are not a useful way to confirm that a new set will settle into place.
Start with what changed
Record whether the contact began immediately after a blade replacement, after ice was cleared, or after other work on the windshield or arms. That timeline is useful evidence, although it does not establish a cause by itself.
Bosch's troubleshooting checklist separates an incorrect vehicle application, installation problems, and motor or mechanism concerns. Use those as distinct checks; buying a shorter blade at random does not identify which requirement is wrong.
Compare the two front positions
Read the replacement listing by driver and passenger position. On a split-size application, a matching pair of numbers can still be assigned to the wrong arms. Keep the old blades and package labels available while checking.
For example, Wowiper's 2020–2024 Outback listing assigns 26 inches to driver and 18 inches to passenger. That example shows why position is part of the application; it does not diagnose a collision on another vehicle.
Work through a stationary checklist
- Confirm the exact model, year, and selected replacement product.
- Check the stated front lengths against the parts actually supplied.
- Verify driver/passenger assignment and the connector's finished position.
- Look for an obvious loose cover or damaged component without forcing the arm.
- If all blade checks match, arrange inspection of the arm or mechanism before further operation.
Avoid changing the arm geometry yourself
Do not bend an arm, reposition it on its mounting, or shorten a blade to make the clearance appear acceptable. Those actions can change the sweep or contact arrangement and make the original problem harder to identify.
Keep control of a detached arm; Honda's handling guidance warns against allowing it to drop onto the glass. Follow your own vehicle manual for access and the matching Wowiper installation instructions for the blade.
Prepare a useful record
Photograph the parked blade positions, package labels, and connectors. Describe where the contact occurred and whether it started with the replacement. Have the application verified before testing the system again on wet glass.