If both wipers stayed upright after replacement, check the maintenance-position exit procedure for your exact model. Keep the arms supported and follow the manual’s order before using the switch.
Read the transcript
Check whether maintenance mode was used. Compare the upright position with the drawing for your exact model. Follow your manual’s sequence for lowering the arms and returning them to park. Keep tools and hands clear of the path. If the arms stay high or hit the trim after the proper sequence, stop and have the system checked.
Check whether the position was intentional
Recall whether the installer used a maintenance or service mode before lifting the wipers. On vehicles that move the arms away from the hood for access, both arms can remain high until the procedure is completed. Compare their position with the illustration for your year and model. If one arm is at a different angle, or the arms stopped during normal driving, record where they stopped and seek service if it remains unexplained.
Find the return instruction in the owner’s manual
The return sequence can specify a power state, switch position and order for lowering the arms. Honda’s 2024 CR-V manual, for example, calls for lowering the arms to the glass before the documented return action. Check your own procedure and make sure the blades are attached and tools are clear before using the switch. Avoid pushing either arm across the windshield by hand.
Confirm the arms have returned
Observe their normal parked position from outside with the system off. If the specified sequence does not return them or if anything strikes the trim, stop testing and describe the arm positions to a service technician. Once the arms return normally, use a brief wet check before depending on the wipers again.