If the warning stays on after a refill, confirm the reservoir and the fluid level using the owner’s manual. Note whether the warning remains with normal spray, the level drops again, or spray is absent. Those observations help a technician narrow the cause without guessing at a sensor or pump.
Read the audio transcript
Confirm that you filled the washer reservoir with the specified fluid. Record the level, the exact message, and whether spray reaches the glass. If the reservoir empties again or the message persists at the correct level, give those observations to a repair shop.
Confirm which reservoir you filled
Find the window washer reservoir in the manual’s under-hood diagram and read the cap before adding anything else. Honda’s example guidance calls for commercial windshield washer fluid. If you suspect you filled the wrong reservoir with any fluid, pause and ask a repair shop what to do before operating the affected system.
Compare the warning with the fluid level
Where the manual shows how to check the level, verify it while the vehicle is parked. Note the amount you added and how quickly the message returned. With the correct level confirmed and clear, wet glass, check normal washer behavior following the vehicle’s instructions. Avoid repeatedly running an empty washer.
What to record for service
Report whether the reservoir appears to stay full, whether the front or rear sprays normally, and whether the message reappears immediately or after driving. If the level repeatedly falls or the warning persists at the correct level, arrange diagnosis. A dashboard message alone cannot identify which component needs work.