Keep control of the exposed arm while changing a blade. Set out the new part, read the required arm position and work on one blade at a time before moving to the next.
Read the transcript
Get the new blade and its instructions ready first. Use the owner’s manual if the arm needs a service position. Keep your hand on the arm while the old blade is off and work on one position at a time. Remove any protective towel before lowering the installed blade or using the wipers.
Prepare while the blades are still attached
Read the owner’s manual and the replacement instructions. Some arms need a service position so they can lift without hitting the hood. Put the replacement blade and its adapter within reach, and identify the side you are working on. Check that nobody can turn on the wipers while your hands are near the arm.
Control the arm whenever the blade is off
The wiper arm can return toward the glass when released. Keep one hand on it when the procedure calls for moving it. Honda’s published replacement instructions warn that a falling arm can damage the arm or windshield. A clean folded towel on the glass can provide an extra buffer while parked. Continue holding the arm and remove the towel before lowering a fitted blade or operating the wipers.
Finish before starting the next position
After you attach the blade, check the connector’s lock using the exact instructions. Return the arm gently as directed. Give the new blade a final look along the edge and remove tools, towels and packing material from the area. Then work on the other side.
Close the hood and follow the vehicle’s procedure to return the wipers to their normal parked position. Do a brief check on wet glass from the driver’s seat while parked. If a blade moves at the connector or touches trim, turn the wipers off and recheck the fit.