A windshield wiper de-icer warms the area around the blades’ resting position on equipped vehicles. Front defrost addresses visibility through the windshield using the cabin climate system. Consult your owner’s manual for the control and wait until the glass is clear and the blades are free before using the wipers.
Read the transcript
Find the windshield wiper de-icer in your owner's manual. Let the blades thaw at the base of the glass. Clear the entire sweep area and check that the blades are free before using them. Keep the wiper control off if ice is still holding a blade.
Find the right control
Look in the climate or winter-operation section of the manual for your vehicle. The 2023 Toyota Highlander manual shows a dedicated wiper de-icer switch on the setup it describes. Use your own manual to confirm the switch and any conditions for activation.
Check around the resting blades
From the driver’s seat, look for loose snow or a line of ice where the blade meets the lower glass. Clear loose snow with a tool intended for automotive glass and follow the vehicle’s cold-weather guidance. Keep clear of the warmed glass and moving arms.
Check the rest of the windshield
A free blade at the bottom can still encounter ice higher on the glass. Clear the entire viewing area and the blade’s sweep path. When the blades are free, follow the manual’s instructions for a check on wet glass while parked.
If the blades remain stuck
Keep the wiper control off and allow more time for thawing. Repeatedly commanding a sweep against ice can strain the mechanism. If the system still cannot sweep normally after the glass and blades have fully thawed, have it inspected.