2007–2014 Toyota FJ Cruiser Wiper Set: Three Front Blades and One Rear

Wowiper lists a four-blade set for selected 2007–2014 Toyota FJ Cruiser models: three front blades measuring 16, 14, and 14 inches, plus one 10-inch rear blade. Check the three front positions before removal; this is not a conventional two-front-blade package.

What is included in the listed set?

Group Listed sizes Quantity
Front windshield 16 + 14 + 14 in 3 blades
Rear window 10 in 1 blade
Complete package Front plus rear 4 blades

The FJ Cruiser product page is the source for those dimensions. It lists the three front sizes together without assigning the 16-inch blade to a specific left, center, or right position. This guide therefore does not invent that assignment.

Map the front positions before ordering

Record each front blade's position and length, then verify the correct application using the vehicle information and replacement instructions. A photo of the full windshield arrangement helps preserve orientation. Use it with an application check, since a previously installed blade can itself be incorrect.

Keep the two 14-inch blades identified while working. Equal lengths do not establish that their attachments, orientation, or supplied components can be treated as interchangeable without checking the instructions.

Why a three-pack may be incomplete for this order

On many listings, “three-pack” describes two front blades and one rear blade. The linked FJ Cruiser package contains three front blades and one rear blade. Count positions, not just packages, when comparing what is included.

  • Confirm FJ Cruiser and a model year within the listed range.
  • Check all three front lengths and their verified positions.
  • Check the separate 10-inch rear blade.
  • Verify front and rear attachment types before taking parts off.

Installing one position at a time

Consult the vehicle manual for access and permitted arm movement. Compare the old and new attachment at one position before proceeding to the next. Do not force a connector closed or bend an arm to compensate for a mismatch.

The Wowiper installation reference can help locate the relevant instructions. For the rear position, use the rear fit checklist independently of the three front blades.

Sources and further reading

Comment form title