The rear window wiper clears the liftgate glass. The backup camera looks through a separate lens. Some equipped vehicles wash that lens when you activate the rear washer. If one view clears and the other remains cloudy, identify the affected surface before replacing a blade.
Read the audio transcript
Check the rear window and backup camera separately. On some vehicles the rear washer also cleans the camera lens. Check your owner's manual for that feature. If the lens stays cloudy, use the specified cleaning method. If the glass still smears, record the rear blade's wipe pattern.
Compare the two views while parked
Look at the rear glass and, when it can be done safely following the manual, assess the camera display separately. A stripe left in the rear blade’s sweep is a glass or wipe symptom. A blurry image with clear rear glass is a reason to check the camera lens and its cleaning instructions.
| Observation | Next check |
|---|---|
| Rear glass clears, camera image stays cloudy | Inspect the camera lens using the manual |
| Camera image clears, a stripe stays on the glass | Check the rear blade’s sweep pattern |
| Both stay cloudy | Check each surface and verify the fitted washer features |
Check for a camera cleaning feature
The 2024 Ford Explorer manual describes a system that cleans the camera in conjunction with the rear window washer. Treat that as one equipment example. Search your manual for rear view camera cleaning, and confirm the feature is fitted before expecting one switch to clean both surfaces.
Record what failed to clear
If the camera alone remains obscured, follow the manufacturer’s lens-care instructions. If rear glass still smears, inspect the wipe pattern on the window. If a clean lens still produces a poor image, document weather conditions, any visible damage, and the warning shown on the display, then arrange service.