Wowiper lists 24-inch driver, 17-inch passenger, and 13-inch rear blades for selected 2010–2017 Chevy Equinox models. Its separate 2018–2021 Equinox set lists 24-inch driver, 18-inch passenger, and 13-inch rear blades. The passenger blade changes between these two listings, so the model year matters even when two of the three measurements match.
Compare the listed Equinox sets
| Model years | Driver | Passenger | Rear |
|---|---|---|---|
| 2010–2017 | 24 in | 17 in | 13 in |
| 2018–2021 | 24 in | 18 in | 13 in |
These are the applications and dimensions on the linked Wowiper listings. They describe those replacement sets, rather than every Equinox sold in every market. Check the vehicle's actual front and rear attachments before ordering.
Why a partially matching set can still be wrong
A box marked 24 inches and 13 inches may look familiar if you are comparing the long front blade and the rear blade. That leaves the shorter front blade unchecked. Record all three positions separately; do not decide that a set fits because the longest blade matches your old one.
The 2010–2017 listing also names GMC Terrain. The 2018–2021 Equinox listing is a separate application. A shared product page does not extend compatibility into another model year or model.
Before placing an order
- Confirm the model year from the vehicle information, rather than the year you bought it.
- Write down driver, passenger, and rear measurements separately.
- Compare both attachment styles with the replacement instructions. The three-blade count does not establish connector fit.
- Check the complete product title and application notes immediately before checkout.
Installing the correct set
Keep the two front blades identified by position while unpacking. Consult the vehicle manual before raising the arms, and use the matching instructions in the Wowiper installation guide. If an attachment differs from the instructions, stop and verify the part rather than forcing it closed.
For a rear-only purchase, the rear wiper buying checklist explains why blade length and attachment must be checked together.